5 Series E39 525td (M51) SAL
72 12 000
Removing and installing or replacing airbag
module on passenger side
Warning!
Note safety regulations for handling airbag modules and
pyrotechnical seat belt tensioners,
refer to MG 72.
Incorrect handling can activate airbag and cause injury.
Warning!
Each time the airbag is triggered, it is necessary to replace
the passenger airbag cover (airbag cover)!
We cannot guarantee that the retaining straps of the airbag
cover will not be damaged when the airbag is triggered.
If a damaged airbag cover is reused, we cannot guarantee
that the retaining straps will work properly.
Caution!
When setting down passenger airbag cover (airbag cover), do
not damage instrument panel.
Remove passenger airbag cover (airbag cover) and place on
instrument panel.
Note:
For ease of removal, insert plastic wedges in both sides of
detents for instrument panel and remove cover.
Do not damage instrument panel when removing.
RA Removing and installing or replacing airbag module on passenger side
BMW AG - TIS
20.02.2013 12:07
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
