5 Series E39 525tds (M51) SAL
-
Screw deflector plate B together with the brake shield to the swivel bearing using the
existing screws.
-
Push on the brake disc and secure it with its retaining bolt.
-
Then using a feeler gauge, check the clearance between the brake disc and the brake
shield/deflector plate right round (min. clearance =
2 mm). If the clearance at some point is less than 2 mm, check whether the brake
shield is misshapen in some way and straighten it if necessary.
-
Refit any components which have been removed from the vehicle.
Parts:
Deflector plate, left
Part no. 34 10 1 165 225
Deflector plate, right
Part no. 34 10 1 165 226
Shank screw
Part no. 34 11 1 164 022
(if required)
Spring washer
Part no. 34 11 1 164 008
(if required)
Reimbursement:
Material and labour costs incurred can be claimed through the usual warranty channels
subject to current warranty terms as follows:
Defect code
34 00 90 39 00
SI Loud squealing/scraping noises E39 with basic front axle
BMW AG - TIS
19.02.2013 21:14
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -