5 Series E39 525tds (M51) TOUR
Unfasten oil pan screws on transmission end.
Unfasten oil pan screws and lift off oil pan.
Installation:
Keep sealing faces clean and free of oil.
Replace seal.
Place seal on oil pan or engine block and coat front and rear
recesses with a line of flexible sealing compound 3 Bond
1209 (refer to BMW Parts Service) approx. 3 mm wide and
2 mm high.
Installation:
To prevent torsional stress during subsequent transmission
assembly, align oil pan flush with side of transmission.
RA Removing and installing, sealing or replacing oil pan (M51)
BMW AG - TIS
20.02.2013 02:10
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -