5 Series E39 525tds (M51) TOUR
11 34 715
Replacing all valve springs (M51)
(cylinder head removed)
Preliminary work is described in section on dismantling and
assembling the cylinder head,
refer to 11 12 504
Removing camshaft,
refer to 11 31 501
Removing bucket tappet with Special Tool 11 3 250.
Installation:
Worn bucket tappets may only be reused in the same tappet
bore.
Fit bucket tappets arranged by cylinder and in correct sequence
on Special Tool 11 3 030.
RA Replacing all valve springs (M51)
BMW AG - TIS
20.02.2013 02:29
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -