5 Series E39 525tds (M51) TOUR
12 41 020
Removing, installing/replacing starter (M51)
Note General Data, refer to 12 00 ...
Interrogate fault memory of DDE control unit.
Switch off ignition.
Disconnect battery ground wire from the battery.
E39:
Unfasten tightening strap on inlet neck, then unscrew and remove
inlet neck.
Unfasten nuts and remove leads from starter motor.
Tightening torque,
refer to Technical Data 12 41 4AZ
Unscrew nuts (1).
Tightening torque,
refer to Technical Data 12 41 1AZ
RA Removing, installing/replacing starter (M51)
BMW AG - TIS
20.02.2013 02:51
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -