5 Series E39 525tds (M51) TOUR
Press injection pump off chain wheel by screwing forcing screw (1)
into special tool 13 5 120.
Caution!
Leave special tool 13 5 120 screwed in until injection pump
is reinstalled, as otherwise chain wheel will fall down and
engine must be dismantled.
Installation:
Fully unscrew forcing screw on tool 13 5 120 before installing
the fuel injection pump.
E39:
Remove rear bracket from fuel injection pump, then remove
injection pump.
E36, E38:
Twist fuel injection pump clockwise to enable bracket on engine
mounting block to be guided past.
Remove fuel injection pump.
Installation:
Replace O-ring on pump flange.
RA Removing and installing/replacing injection pump (M51)
BMW AG - TIS
20.02.2013 03:02
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -