5 Series E39 525tds (M51) TOUR
Rotate crankshaft clockwise towards the TDC setting of cylinder 1
(starting approx. 60 ... 90
°
before this point) until the indicator
remains stationary for a short time at its lowest point. Set scale of
dial gauge to zero.
For inspection, 1st cylinder in TDC (working stroke):
Unscrew and remove oil filler cover.
1st cam on camshaft must point upwards.
Remove plug. Rotate crankshaft clockwise until the plug mandrel
(special tool 11 2 300) engages in the appropriate bore of the
flywheel.
Caution!
Do not rotate counter-enginewise - incorrect measuring result.
Read off stroke of distributor piston on dial gauge.
Note adjustment value, refer to Technical Data.
RA Adjusting injection pump statically (DDE 2) (M51)
BMW AG - TIS
20.02.2013 03:08
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -