5 Series E39 525tds (M51) TOUR
Unfasten nut and remove line from fuel cutout unit.
Tightening torque, refer to Technical Data 13 51 9AZ
Unscrew fuel cutout unit with open-end wrench waf 24.
Tightening torque, refer to Technical Data 13 51 3AZ
Caution!
Pistons and spring may fall out. Check that O-ring is correctly
seated and check for damage. Replace if necessary.
Without current the plunger will be run out by spring force and the
fuel feed bore shut.
Interrogate fault memory of DDE control unit and check fault
messages stored in memory. Rectify faults, then clear the fault
memory.
RA Replacing electrical fuel cutoff unit (M51)
BMW AG - TIS
20.02.2013 03:10
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -