5 Series E39 525tds (M51) TOUR
16 11 130
Checking filler cap pressure relief valve
Special tools required:
•
13 3 010
•
16 1 171
•
16 1 172
•
16 1 173
Set pressure regulator on special tool 16 1 171 fully in "-"
direction.
Connect special tool 16 1 171 via compressed air line (1) to
garage compressed air system (8...10 bar).
Connect pressure sensor (2) of Diagnosis and Information System
with a measuring range of 0...3.5 bar.
Select special tool 16 1 172 or 16 1 173 matching vehicle's
filler cap and attach to quick release coupling of special tool
16 1 171 .
Install filler cap on selected special tool (3).
Note:
Only the absolute pressure is indicated in the display of the
Diagnosis and Information System (DIS). The current ambient
air pressure is already displayed without additional
pressurization.
RA Checking filler cap pressure relief valve
BMW AG - TIS
20.02.2013 03:21
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -