5 Series E39 525tds (M51) TOUR
M62
Unfasten cap on expansion tank.
Release vent screw.
If necessary, remove front underbody protection.
Unscrew drain plug at bottom of radiator.
Installation:
Replace seal.
Tightening Torque,
refer to Technical Data 17 11 2AZ.
Drain, catch and dispose of coolant.
M62
If necessary, remove front underbody protection.
Cars with automatic transmissions:
Turn hose plug (1) to left and detach towards bottom.
Cars with manual transmission:
Remove drain plug at bottom of radiator.
Drain, catch and dispose of coolant.
Unfasten drain plug on engine block.
M62
Remove drain plugs on left and right of engine block.
Installation:
Replace seal.
Tightening Torque,
refer to Technical Data 11 11 5AZ.
Drain, catch and dispose of coolant.
RA Draining and topping up coolant
BMW AG - TIS
20.02.2013 03:32
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -