Standard Chassis & Wheel Alignment for 5 Series E39 525tds: RA 16
•
If necessary, adjust front axle and rear axle
•
Perform output measurement in accordance with equipment
manufacturer's instructions.
•
Save and print out test record.
•
Carry out steering angle sensor adjustment
•
Insert locking pins into both rotary and sliding plates
•
Remove chassis/wheel alignment system
•
Drive vehicle off lifting platform.
RA Standard chassis / wheel alignment with DIN load
BMW AG - TIS
20.02.2013 05:51
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -