5 Series E39 525tds (M51) TOUR
-
Do not point the firing pellet of a gas generator at other persons.
-
Components with gas generators must not be fired when removed but must rather be disposed of by special
disposal companies or sent to BMW in the packaging of the new components.
-
When carrying out straightening and welding work with an electric welder:
-
Disconnect battery
-
Cover negative terminal (post)
-
Disconnect plug connections to the gas generators so that the power supply to the gas generators is cut off in
each case
-
When removing a fired airbag module, avoid all contact with the skin - wear gloves. In the event of skin contact -
wash with water.
2. Transport
-
Components with gas generators must be sent off in the packaging of the new components.
3. Storage
-
Observe the regulations of the relevant trade supervisory authority and the applicable national regulations.
RA Safety regulations for handling airbag system components
BMW AG - TIS
20.02.2013 06:18
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -