5 Series E39 525tds (M51) TOUR
Slacken nut (1).
Push shock absorber to side and pull out bolt.
Installation:
Replace nut.
Watch insertion direction of bolt:
touring = bolt head at rear in driving direction.
Tightening torque,
refer to Technical Data 33 32 14AZ.
Open plastic holder (1).
Unfasten nut - brace on hexagon if necessary and remove control
arm.
Installation:
Tapered pin and bore free of grease.
Replace nut.
For tightening torque,
refer to Technical Data 33 32 8AZ.
RA Replacing one control arm at top (touring)
BMW AG - TIS
20.02.2013 06:55
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -