5 Series E39 525tds (M51) TOUR
Open up brazed seam.
Drill out welded spots in area (1).
Cut through area (2) in connecting plate between door
column/carrier support.
Remove connecting plate between door column/carrier support.
Expose and drill out welded spots on connecting plate between
wheel arch/door column.
Expose and grind down welded seams.
Separate connecting plate between wheel arch/door column.
RA Replacing front left door column (partial replacement) (front side panel removed
BMW AG - TIS
20.02.2013 09:09
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -