5 Series E39 525tds (M51) TOUR
Coat connection faces of vehicle and spare part and coat with zinc
dust paint.
Install reinforcement plate in cover for side member approx. 30
mm.
Secure reinforcement plate and weld up.
Prepare and fit the C-column reinforcement plate.
Reinforcement plate width = approx. 60 mm
Clean the vehicle and replacement part joint surfaces.
Drill holes for plug welding C-pillar reinforcement plate in body.
Insert reinforcement plate (1) approx. 30 mm in C-pillar and weld.
RA Replacing rear left side wall (part replacement C- and D-pillar, top) (touring)
BMW AG - TIS
20.02.2013 09:21
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -