5 Series E39 525tds (M51) TOUR
Adjust gap dimensions, height and position of rear window frame
relative to other fittings on rear window frame,
refer to 41 00.
Note:
Do not alter inclination of striker (2) when adjusting height.
To adjust height of rear window frame at lock, release lock nut (1)
and turn striker (2).
Tighten down lock nut (1) again.
Caution!
After adjusting the rear window frame, always check
the position of the wiper axis relative to the drive disc and
the limit stop on the rear window wiper motor and adjust if
necessary,
refer to 61 62 060.
RA Adjusting trunk lid to fit (touring)
BMW AG - TIS
20.02.2013 09:30
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 16 -