5 Series E39 525tds (M51) TOUR
Note:
For removal and installation of the hydraulic cylinder, the ball
pin (2) must be removed for space reasons.
Release screw (1) and remove ball pin (2) through opening (3).
Routing of hydraulic hoses (1) and (2):
Routing of hydraulic hoses (1) and (2):
Routing of hydraulic hoses (1) and (2):
RA Removing and installing/replacing hydraulic cylinder for rear lid (electrohydrau
BMW AG - TIS
20.02.2013 10:26
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -