5 Series E39 525tds (M51) TOUR
Lift out cover (1) at bottom and on side (plug-in groove).
Lift out cover (1) with center armrest (plug-in groove).
Remove cover with support from backrest frame.
Note:
The operation "Removing back-rest cover with support" ends
here.
Replacement of "support":
Cut through all clips.
Remove all remnants of clips from cover and support.
Installation:
Lock new retainers by bending with special tool 52 0 050.
RA Replacing backrest cover for left rear seat (load through system)
BMW AG - TIS
20.02.2013 11:59
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -