5 Series E39 525tds (M51) TOUR
Unlock plug connection (1) and disconnect.
Release hose clamps (2) and detach hoses.
Pull water valve for heater (3) in direction of arrow out of rubber
mounts.
Installation:
Ensure guides (1) and (2) are correctly seated.
If necessary, replace rubber mount.
Water valve (Mono) without auxiliary water pump:
Unlock plug connection (1) and disconnect.
Release hose clamps (2) and detach hoses.
Pull water valve for heater (3) in direction of arrow out of rubber
mounts.
Installation:
Ensure guides (1) and (2) are correctly seated.
If necessary, replace rubber mount.
All:
RA Replacing water valve for heater
BMW AG - TIS
20.02.2013 14:14
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -