5 Series E39 525tds (M51) TOUR
67 66 510
Removing and installing/replacing lumbar
support drive mechanism on front seat, left or
right
Adjust front seat to maximum upper setting.
Version with plastic holder:
Detach hose on drive unit for lumbar support and disconnect plug
connection.
Note:
Grip hose connection on drive unit for lumbar support with pointed
pliers (risk of damage to drive unit for lumbar support).
Release cable ties (1). Unlock catch (2). Turn drive unit for
lumbar support (3) downwards and detach towards rear.
Version with bag:
Remove rear panel on front seat backrest.
Release cable ties (1) on drive unit for lumbar support (2) and
pull forward a little.
RA Removing and installing/replacing lumbar support drive mechanism on front seat,
BMW AG - TIS
20.02.2013 15:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -