5 Series E39 525tds (M51) TOUR
86 10 ...
Removing loading ramp lock
Unscrew bolts (1).
Installation:
Tightening Torque,
refer to Technical Data 86 10 28AZ.
Pass lever (1) of rotary striker lock (2) out of square hole (3) by
twisting from side to side.
Unscrew bolts (1).
Installation:
Opening for securing clip (2) points to front or rear.
Square-head nut (3) rests with its square surface parallel to
bearing pedestal (4).
Tightening Torque,
refer to Technical Data 86 10 29AZ.
Raise edge (1) of securing clip and slide in direction of arrow
towards rear.
Detach bearing pedestal (2).
RA Removing loading ramp lock
BMW AG - TIS
20.02.2013 16:26
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -