bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

4 SI Coolant Hose For Throttle Valve Preheating Unit E36 E38 E39 M52|Page 76 > < 3 SI Leaded Fuel With Catalytic-converter Vehicles All Models Since Model Year 86|Page 74
Page 1
background image

VK-23/Seyfried

Baugruppe/Group: 13

00130701/0697

06/1997

Coolant hose for throttle valve preheating unit

E36, E38, E39 / M52

Situation: 

In place of the fabric-reinforced coolant hose for the throttle valve preheating unit, an
unreinforced hose has been installed. The hose in question is illustrated in Figure 1 on
page 2, marked position 1, connecting the throttle body to the heating return pipe.

Effect: 

The hose does not satisfy the requirements laid down for coolant hoses. Coolant loss
through the hose decomposing or bursting cannot be ruled out.

Affected
vehicles:

E36, E38, E39/M52
Manufacturing period: As per list of vehicle identification numbers
(March 1997)

Procedure:

Fig. 1:

Coolant hoses for throttle valve
preheating unit

-

Check whether the correct coolant hose has been installed 
(Fig. 1, position 1):

1st possibility: Check the part number

Correct part number: 13 54 1 703 945

Incorrect part number: 11 15 1 740 393

The part number is embossed in the hose (see Fig. 2).

Fig. 2:

Identification marking of the correct
coolant hose

SI  Coolant hose for throttle valve preheating unit E36 E38 E39 M52

BMW AG - TIS

19.02.2013  23:29

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

4 SI Coolant Hose For Throttle Valve Preheating Unit E36 E38 E39 M52|Page 76 > < 3 SI Leaded Fuel With Catalytic-converter Vehicles All Models Since Model Year 86|Page 74