5 Series E39 528i (M52) SAL
Fit special tool 11 3 240 to camshafts on cylinder 6.
Note:
Camshaft adjustment is correct if special tool 11 3 240
bears on the cylinder head without gaps.
Lift timing chain and hold under tension.
Rotate engine from the 30
°
before TDC position engine-wise up to
TDC position.
Secure crankshaft in TDC position with special tool 11 2 300.
Caution!
Remove special tool 11 2 300 (plug mandrel) before
switching on the engine.
Fit primary timing chain to sprocket.
Fit sprocket to exhaust camshaft with threaded bores on left side
aligned down the deep bores.
Install special tool 11 4 220 in chain tensioning sleeve.
Screw in the adjusting screw to touch the bow cover, but do not
yet tighten it.
RA Replacing camshaft (M52/S52)
BMW AG - TIS
21.02.2013 15:44
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 10 -
