5 Series E39 528i (M52) SAL
Unfasten sprocket screws on exhaust camshaft.
Remove special tool 11 3 240 from camshaft.
Align camshaft with open-end wrench.
Caution!
Do not damage the cylinder head.
Machine open-end wrench accordingly if necessary.
Fit special tool 11 3 240 to camshafts on cylinder 6.
Note:
Camshaft setting is OK if special tool 11 3 240 can lie flush
on the cylinder head.
RA Adjusting camshaft timing (M52/S52)
BMW AG - TIS
21.02.2013 15:47
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -