5 Series E39 528i (M52) SAL
11 62 140
Removing and installing, sealing or replacing
both exhaust manifolds (M52/S52)
Unfasten exhaust pipe from manifold.
Disconnect connector for oxygen sensor.
Unclip oxygen sensor cable from bracket.
If necessary, remove non-return valve and pipe for secondary air
induction.
Installation:
Replace seals.
Coat thread with copper paste -CRC-.
Replace nuts.
Unfasten nut on exhaust manifold.
Installation:
Replace seals.
Coat thread with copper paste -CRC-.
Replace nuts.
Tightening torque,
refer to Technical Data 11 62 1AZ
RA Removing and installing, sealing or replacing both exhaust manifolds (M52/S52)
BMW AG - TIS
21.02.2013 15:57
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
