5 Series E39 528i (M52) SAL
Caution!
Fitting knock sensors incorrectly during assembly causes
engine damage!
Knock sensor with short cable leads to cylinders 4 to 6.
Installation:
Clean support face of knock sensors on engine block.
Tightening torque,
refer to Technical Data 12 14 2AZ
Interrogate fault memory of DME control unit, check faults stored
in memory, rectify faults, then clear fault memory.
RA Replacing knock sensor(s) (M52,S52,S50US)
BMW AG - TIS
21.02.2013 16:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
