5 Series E39 528i (M52) SAL
13 64 541
Removing and installing/replacing all injector
valves (M52,S52)
Interrogate fault memory of DME control unit. Switch off
ignition.
Remove air manifold box.
Place cable channel to one side.
Remove cover from injection valves.
Unclip plug connections from Lambda oxygen sensors.
Disconnect plug connection from VANOS solenoid valve.
Lift connector strip off injection valves and place to one side.
RA Removing and installing/replacing all injector valves (M52,S52)
BMW AG - TIS
21.02.2013 16:50
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
