5 Series E39 528i (M52) SAL
Force open bearing bushing (1) and withdraw using a suitable
tool.
Important!
Force open bearing bushing (1) at specified indent (2) only.
Bore hold must not be damaged!
Drive in bearing bushing (1) with special tool (see table) as far
as it will go.
Important!
Make sure you use the correct special tool, as the different
tools have different dimensions!
5th gear
23 4 022 (short)
Reverse gear
23 4 023 (long)
Drive in sealing cap (1) with special tool
23 4 021 .
Fit retaining ring.
RA Replacing bearing bushing for 5th/reverse gear locking pin (C/F transmission) -
BMW AG - TIS
21.02.2013 17:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
