5 Series E39 528i (M52) SAL
24 12 016
Replacing radial seal for output flange
(A5S 310Z)
Note:
After completing these operations, check the transmission
oil level and top up if necessary,
refer to 00 11 239 (A5S 310Z)
Disconnect propeller shaft from transmission and tie to one
side,
refer to 26 11 000
Remove heat shield (1).
Support transmission with special tool 24 5 300 in conjunction
with lifting fixture 00 2 030.
Unfasten screws and remove crossmember.
Installation:
Tightening torque,
refer to Technical Data 24 71 1AZ / 2AZ
RA Replacing radial seal for output flange (A5S 310Z)
BMW AG - TIS
21.02.2013 18:14
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
