5 Series E39 528i (M52) SAL
25 16 051
Removing and installing/replacing shift tower
Move selector lever into "P" setting.
Remove protection under transmission.
Brace clamp section (1) and loosen nut (2).
Installation:
Adjust shift lever,
refer to 24 00 007.
Brace cable on hex head (1) and loosen nut (2).
Remove cable from bracket.
Installation:
Tightening torque,
refer to Technical Data 25 16 1AZ.
Pull off handle.
RA Removing and installing/replacing shift tower
BMW AG - TIS
21.02.2013 18:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
