5 Series E39 528i (M52) SAL
Unlock cable retainer (1) and detach.
Detach retaining plate (2).
Slide cable (3) as far as possible in direction of transmission
tunnel.
Installation:
When installing shift cable, make sure rubber pad (2) is
installed in shift cable fork (1).
Press locking plate (1) in direction of arrow and turn shiftlock
solenoid (2) clockwise until shiftlock solenoid (2) can be withdrawn
from shift tower (3).
Installation:
Insert shiftlock solenoid (2) into shift tower (3) and turn
counterclockwise until locking plate (1) snaps into place.
Installation:
Locking plate (1) of shiftlock solenoid valve (2) must be
positioned behind latch edge (3) (latched).
RA Removing and installing/replacing shiftlock solenoid (Steptronic)
BMW AG - TIS
21.02.2013 18:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
