5 Series E39 528i (M52) SAL
31 12 075
Checking both tension struts
Remove all acoustic insulation from engine compartment.
Remove cap from traction strut bearing.
Installation:
Insert cap in clip.
Note:
Note the markings on the tension strut.
1 = Date stamp
2 = Side designation L = left; R = right
Different tension struts may be fitted.
A: Tension strut with date stamp (1)
B: Tension strut without date stamp
Prepare special tool 31 1 401.
A: Tension strut with date stamp
Remove spacer 31 1 402 from special tool 31 1 401.
B: Tension strut without date stamp
Attach spacer 31 1 402 to special tool 31 1 401.
RA Checking both tension struts
BMW AG - TIS
21.02.2013 19:08
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -