5 Series E39 528i (M52) SAL
Remove control arm from swivel bearing,
refer to 31 12 001.
Remove tension strut from swivel bearing,
refer to 31 12 080.
Pull swivel bearing downwards and remove.
Unfasten screws and remove wheel bearing.
Fit protective plate (1) and cap (2) to new swivel bearing. Note
alignment of bore.
Fit wheel bearing - note instructions,
refer to 31 21 180.
RA Replacing left or right swivel bearing (Basis)
BMW AG - TIS
21.02.2013 19:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -