5 Series E39 528i (M52) SAL
Pull out shaft seal with special tool 00 5 010 .
Drive in new radial seal as far as it will go:
-
Special tools 00 5 500 and 33 3 440 for final drive
220/215 compact
-
Special tools 00 5 500 and 33 3 470 for final drive 188
compact
Coat sealing lips of shaft seal and sealing face of drive flange with
differential oil.
Attach drive flange.
Press on drive flange with special tools 23 1 300 , 23 1 302
and 33 1 341 but only to such an extent as to allow collar nut to
be screwed on.
Tighten down collar nut (1) only until marker points are aligned.
Caution!
Do not under any circumstances tighten down collar nut
beyond the marker points, otherwise clamping sleeve will
have to be replaced.
RA Replacing shaft seal for input flange on final drive
BMW AG - TIS
21.02.2013 20:19
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -