5 Series E39 528i (M52) SAL
Bleed front-axle brake circuit.
Attach bleed hose with container to bleed valve on front right
brake caliper.
Open bleed valve.
Fully depress brake pedal at least 12 times. Brake fluid must
emerge clear and free of bubbles.
Hold down brake pedal in fully depressed position.
Close bleeder valve.
Release brake pedal.
Follow same procedure on front left wheel brake.
Switch off brake fluid changer and remove from expansion tank.
Check brake fluid level.
Close expansion tank.
Note:
Take care of rubber gasket (1) in lid.
RA Bleeding brake system with ABS/ASC+T
BMW AG - TIS
21.02.2013 20:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
