bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

4 RA Removing And Installing Or Replacing Left Or Right Rear Brake Caliper|Page 1599 > < 3 RA Removing And Installing Or Replacing Both Rear Brake Disks
Page 1
background image

34 21 745

Removing and installing or replacing left or
right rear brake caliper 

Remove rear wheel.

Caution!

After completing tasks, bleed brake system.

Apply pedal support and press brake pedal slightly. This prevents
brake fluid from emerging from the expansion tank and air from
entering the brake system when the brake lines are opened.

Release screws (1).

Installation:

Tightening torque, 34 21 3AZ .

Release brake hose (2).

Unfasten brake hose on connection point to brake line.

Right side:

Disconnect plug connection for brake lining sensor.

Pull off fist caliper towards rear of vehicle.

Installation:

RA  Removing and installing or replacing left or right rear brake caliper

BMW AG - TIS

21.02.2013  21:01

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

4 RA Removing And Installing Or Replacing Left Or Right Rear Brake Caliper|Page 1599 > < 3 RA Removing And Installing Or Replacing Both Rear Brake Disks