5 Series E39 528i (M52) SAL
35 41 ...
Adjusting bowden cable for throttle valve
actuation
Manual transmission
1.
Accelerator pedal on idle speed stop.
2.
Throttle valve in idling position.
3.
Adjust Bowden cable with adjusting screw (2) until there is no
clearance.
4.
Adjust adjusting screw (C) on full throttle stop of pedal until
there is still clearance of 0.5 mm on throttle valve when pedal
is in full throttle position. (Untighten adjusting screw 1.5
complete turns - corresponds to 0.5 mm air).
Lock full-throttle stop with nut.
Automatic transmission:
1.-3. as for manual transmission
4.
Adjust full throttle detent until, in kick-down setting (full throttle
detent depressed), there is still 0.5 mm of clearance at full
throttle stop on throttle valve.
(Untighten full throttle detent 1.5 complete turns -
corresponds to 0.5 mm air).
Lock kick-down detent with nut.
RA Adjusting bowden cable for throttle valve actuation
BMW AG - TIS
21.02.2013 21:38
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -