5 Series E39 528i (M52) SAL
41 00 ...
Gap dimensions on doors /engine hood and
trunk lid
Door joints and lid joints 4
±
1 mm.
Permitted parallelity deviation 1.0 mm.
Plane offset to relevant body section joining at back
A = max. 1 mm inwards.
Exception:
Rear lid may protrude 0.5 mm outwards.
There must be a rear lid/tail panel gap
of min. 5 mm.
RA Gap dimensions on doors /engine hood and trunk lid
BMW AG - TIS
21.02.2013 22:10
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
