5 Series E39 528i (M52) SAL
Cut off new engine carrier to size to match cut on car and fit in.
Clean mating surfaces and drill holes for plug welding.
Clean engine carrier connection and drill holes for plug welding.
Produce reinforcement plates with width (B) of about 60 mm and
coat with zinc dust paint.
Insert reinforcement plates half their width into engine carrier and
plug weld.
Align partial replacement piece with straightening attachment (1)
and plug weld.
Weld engine carrier in welding joint.
Grind down and clean welded seam and welded spots.
RA Replacing right engine carrier (partial replacement in front of front axle)
BMW AG - TIS
21.02.2013 22:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
