5 Series E39 528i (M52) SAL
Remove foam (1).
Caution!
If vapors are produced when the foam is removed, these must
be extracted. Ensure the area is well ventilated.
Drill out welding spots on C-pillar.
Drill out welding spots in C-pillar in the area exposed by the foam.
Drill out welding spots on C-pillar on the connection point in the
wheel arch extension.
Drill out welding spots on the closing plate of the side member and
grind down.
RA Replacing rear left outer section of wheel arch (side panel removed)
BMW AG - TIS
21.02.2013 22:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
