5 Series E39 528i (M52) SAL
Define, mark out and cut through connection point in cover for
side member.
Dimension (A) = 50 mm of last hole in side member cover
∅
12
mm (1).
Cut out area of reinforcement for jack support connection point
approximately.
Expose connection point of roof gutter, lamp carrier and rear
apron and open.
Expose connection point of rear window frame and open.
Expose connection point of wheel housing extension and open.
Expose connection point of wheel arch and open.
Note:
The following work step applies to the M5 only.
RA Replacing the rear left side panel
BMW AG - TIS
21.02.2013 23:01
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
