5 Series E39 528i (M52) SAL
51 24 100
Removing and installing/replacing trunk lid
lock (upper section of trunk lid lock)
Remove lower trim power from trunk lid,
refer to 51 49 005
Lift out actuating rod (1).
Disconnect plug connections (2).
Unfasten screws and remove upper section of trunk lid lock.
Installation:
Perform function check with trunk lid open.
Adjust upper section of trunk lid lock (operation is described in
section on "adjusting trunk lid to fit"),
refer to 41 62 014
Only replace:
Unfasten screws and remove actuator drive (1).
Lift out actuating rod (2).
RA Removing and installing/replacing trunk lid lock (upper section of trunk lid loc
BMW AG - TIS
22.02.2013 00:04
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
