5 Series E39 528i (M52) SAL
When reusing the rear window:
Remove glue residue on rear window with knife to
approx. 0.5 mm.
Secure cable (1) (rear window heating/antenna) with adhesive
tape.
Treat rear window around glued area (A) with materials approved
by BMW (repair kit, Sourcing Reference: BMW Parts Service),
refer to 51 31 ...
Note:
Note ventilation time!
(A) = 25 mm (top/side)
(A) = 27 mm (bottom)
Fit gasket at bottom of rear window and press into place.
Fit seal (1) at top in center of rear window and press downwards.
Note:
Sealing strip (1) and rear window are marked in center (2).
RA Removing and installing rear window
BMW AG - TIS
22.02.2013 00:10
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
