bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

1 RA Removing And Installing_replacing Trim For Rear Parcel Shelf|Page 2260 > < 6 RA Removing And Installing_replacing Trim For Pedal Assembly
Page 1
background image

51 46 000

Removing and installing/replacing trim for
rear parcel shelf

Necessary preliminary tasks:

Remove both panels for rear roof pillar (C-pillar finishers).

Release all seat belts at rear bottom.

Version without through-loading system:

Remove rear seat backrest.

Version with through-loading system:

Remove both rest side sections on rear seat backrest.

Version with rear window roller blind only:

If necessary, release screws and nuts in luggage compartment.

Installation:

Tightening torque 51 46 3AZ.

Version with rear window roller blind only:

If necessary, disconnect plug connection (1).

Unlock catches (1) with feeler gauge and pull out both trim
grills (2) in direction of arrow.

RA  Removing and installing/replacing trim for rear parcel shelf

BMW AG - TIS

22.02.2013  00:37

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

1 RA Removing And Installing_replacing Trim For Rear Parcel Shelf|Page 2260 > < 6 RA Removing And Installing_replacing Trim For Pedal Assembly