bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

2 RA Removing And Installing Or Replacing Both Seat Rails On Left Or Right Front Seat|Page 2340 > < 1 RA Removing And Installing Front Seat (comfort)
Page 1
background image

52 17 010

Removing and installing or replacing both
seat rails on left or right front seat (comfort)

Remove front seat,

refer to 52 17 000

Remove seatbelt tensioner,

refer to 72 11 030

Remove hose from lumbar support pump and disconnect
connector.

Note:

Brace hose connection on lumbar support pump with pincers
(risk of damaging lumbar support pump).

Only replace:

If necessary, cut through cable tie (1).

Unfasten detent (2). Twist lumbar support pump (3) downwards
and pull backwards to remove.

Only replace:

Unfasten screw and pull interior finisher forwards to remove.

RA  Removing and installing or replacing both seat rails on left or right front seat

BMW AG - TIS

22.02.2013  01:13

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

2 RA Removing And Installing Or Replacing Both Seat Rails On Left Or Right Front Seat|Page 2340 > < 1 RA Removing And Installing Front Seat (comfort)