5 Series E39 528i (M52) SAL
Version with rear / top lumbar support switch up to
Model Year 1996:
Unlock and remove cable connectors (1 ... 3).
Remove switch combination (4) for seat adjustment and switch (5)
for lumbar support.
Lift out wiring harness (6) of clip (7) and remove finisher.
Installation:
Wiring harness (6) must be routed around central clip (8).
Version with lumbar switch at side as of Model Year 1996:
Unfasten central clip (1) and remove.
Version with lumbar switch at side as of
Model Year 1996:
Unlock and remove cable connector (1).
Remove switch (2) and switch combination (3) for seat
adjustment.
Remove cover.
Installation:
Wiring harness (4) must be routed around support for central clip
(5).
RA Removing and installing / replacing cover on left or right front seat (comfort)
BMW AG - TIS
22.02.2013 01:15
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
