bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

10 RA Removing And Installing _ Replacing Headliner Mechanism For Glass Slide_tilt Sun|Page 2425 > < 9 RA Replacing Seal For Slide_tilt Sunroof Lid
Page 1
background image

54 12 126

Removing and installing / replacing headliner
mechanism for glass slide/tilt sunroof

Installation:

If necessary, apply light coat of Renax GL1 (Fuchs) grease
to guide duct.

Removing and installing headliner for glass slide/tilt sunroof
cover,

refer to 54 12 136

Note:

Always replace headliner mechanism for glass slide/tilt
sunroof in pairs.

Slide headliner mechanism (1) fully forwards.

Move mechanism back until nipple (2) is located to right of plastic
slides (3).

Removal of headliner mechanism with "flexible fulcrum
pad"(only on right side):

Note:

The flexible fulcrum pad (1) is securely attached to the rail (2)
(cannot be removed).

3

Outer guide

4

Inner guide

RA  Removing and installing / replacing headliner mechanism for glass slide/tilt sun

BMW AG - TIS

22.02.2013  01:39

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

10 RA Removing And Installing _ Replacing Headliner Mechanism For Glass Slide_tilt Sun|Page 2425 > < 9 RA Replacing Seal For Slide_tilt Sunroof Lid