bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

11 RA Removing And Installing_replacing Headliner For Sun-roof Lid|Page 2428 > < 10 RA Removing And Installing _ Replacing Headliner Mechanism For Glass Slide_tilt Sun|Page 2426
Page 1
background image

54 12 132

Removing and installing/replacing headliner
for sun-roof lid

Installation:

If necessary, apply light coat of Renax GL1 (Fuchs) grease
to guide duct.

Remove sun-roof lid,

refer to 54 12 100

The mechanism must be lowered at the back by dimension (A). If
necessary, lower as with the installed slide/tilt sunroof cover.

Distance (A) = 2 to 3 mm

Pull headliner slowly forwards (with clean hands or wearing
protective gloves).

Unfasten left/right Torx screws and pull headliner
forwards/upwards to remove.

RA  Removing and installing/replacing headliner for sun-roof lid

BMW AG - TIS

22.02.2013  01:40

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

11 RA Removing And Installing_replacing Headliner For Sun-roof Lid|Page 2428 > < 10 RA Removing And Installing _ Replacing Headliner Mechanism For Glass Slide_tilt Sun|Page 2426