bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

62 Instruments > < 2 RA Replacing Fluid Tank For Windshield Washer System|Page 2604
Page 1
background image

61 71 100

Removing and installing/replacing window
washer pump (windshield/rear window)

Remove wheel arch cover at front right top.

Drain fluid tank for windshield washer system

Note:

When removing, carefully pull out window washer pump so that
strainer is not pulled off and thus does not fall into fluid tank for
windshield washer system. If this does happen, the fluid tank for
the windshield washer system must be removed so that the
strainer can be taken out.

Disconnect plug connection (2) in direction of arrow.

Detach hose (1) with angle section in direction of arrow from
window washer pump (3).

Turn window washer pump (3) and pull upwards out of fluid tank
for window washer system (4).

touring only:

The rear window washer pump is removed in the same way as the
windshield washer pump.

Installation:

Ensure hose is laid without kinks.

Replace seal and strainer for windshield washer pump. 

Coat seal with antiseize agent.

RA  Removing and installing/replacing window washer pump (windshield/rear window)

BMW AG - TIS

22.02.2013  02:49

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

62 Instruments > < 2 RA Replacing Fluid Tank For Windshield Washer System|Page 2604