bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

18 RA Removing And Installing _ Replacing The Controller For The Rear Fan > < 17 RA Removing And Installing _ Replacing The Rear Fan Completely
Page 2
background image

Unclip side carpet (1), left and right, at rear and pull out of clips
towards rear.

Unclip trim (1) from above and take out towards front.

Unscrew bolts (1). Remove console (2) towards top.

Unscrew bolts (1). Disconnect connector (2). Pull out rear fan (3)
towards rear.

Installation:

Make sure air duct is correctly seated.

RA  Removing and installing / replacing the rear fan completely

BMW AG - TIS

22.02.2013  03:58

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 2 -

18 RA Removing And Installing _ Replacing The Controller For The Rear Fan > < 17 RA Removing And Installing _ Replacing The Rear Fan Completely